Home | Catalog | In Shop Services | Gallery | Contact
Gas Tank Skids

Four X Doctor Gas Tank Skids:

The Four.X.Doctor Offers skid plate protection for your Jeeps stock plastic gas tank, and Broncos with North West 23 gallon tanks. They are available for the TJ, or CJ with up to a 20 gallon tank. Our unit replaces Jeeps stock tin shield, which offers very little bottom and no side protection. Also available for Early Bronco's

All FXD tank skids are laser cut out of a single piece of 3/16" steel, and bent from front to back.

NEW! CJ / YJ Stock 15-GAL
Crawler Tank Skids:

Run 3/16" sides, with 4 cut outs for drainage. Heavy-Duty protection for 15-gallon tanks.

CJ- $200 + Shipping


TJ Tank Skids:

Run 3/16" sides, with 6 cut outs for drainage. You also gain 1-1/2" of ground clearance, and about a 1/4" to more from the differential. We have also moved the skid to the passenger side of the jeep for more driver side shock clearance.

NOW AVAILABLE: Non-Body Lift—
3/4" additional clearance Tank Skid!

TJ (Non-Raised)- $215 + Shipping
TJ (Raised)- $225 + Shipping


CJ 20-Gallon Tank Skids


Run 3/16" sides, with 4 cut outs to let water and dirt exit from the skid. It uses the factory tank strap and mounting holes for bolt up. You gain a 1/4" of clearance from the differential. Some CJs require you to drill 2 outer holes in the front cross member for mounting.

CJ - $220 + Shipping


Bronco Tank Skids


Run 3/16" sides. The skid uses the north west tanks J.hook for the drivers side mount, and you need to drill a hole on the passenger side frame for a nut and bolt set up. This skid has 4 cut outs for drainage.

Bronco- $185 + Shipping


YJ, XJ & ZJ Tank Skids


Run 3/16" sides, with 4 cut outs to let water and dirt exit from the skid. It uses the factory tank strap and mounting holes for bolt up.

YJ - $225 + Shipping
XJ (’97-’01) -
$215 + Shipping

ZJ (’93-’98)- $215 + Shipping

CRAWLER EXTREME GAS TANK—TJ

This is the Crawler™ EXTREME (EXT) Gas Tank to fit a TJ (1997-2006). It is specifically designed to allow the rear axle to be moved back up to 5" (4" on Dana 60) to strech the Wrangler wheelbase for greater stability on big tires.

NOTE: See SC for 2.5" stretch or COMP model for up to 7" stretch.

Each tank is made from 1/8" thick Aluminum alloy and is assembled in a foam lined matching heavy duty 3/16" thick skid plate with stainless steel straps and factory Mopar roll over valves.

Internal baffles reduce fuel movement and keep fuel near the pick up.

1" more ground clearance than stock and improved departure angle.

19.5 gallon fuel capacity (but with careful filling we have gotten more in!)

All Crawler fuel tanks are designed to accept all the stock Jeep fuel pump/sensor and other related equipment so you will not get any check engine lights or other engine computer issues.

All tanks are 100% pressure tested.

Patent Pending.

NOTE: Because of shape and location changes, installation of this product may require changes to the exhaust tail pipe.

CRAWLER EXTREME GAS TANK —YJ

This is the Crawler™ EXTREME (EXT) Gas Tank to fit a YJ (1987-1995). It is specifically designed to allow the rear axle to be moved back up to 5" (4" on Dana 60) to strech the Wrangler wheelbase for greater stability on big tires.

Each tank is made from 1/8" thick Aluminum alloy and includes a matching heavy duty 3/16" thick skid plate.

A sump and internal baffles reduce fuel movement and keep fuel near the pick up

1" more ground clearance

17 gallon fuel capacity (but with careful filling we got one more gallon in)

All Crawler fuel tanks are designed to accept all the stock Jeep fuel equipment so you will not get any check engine lights or other engine computer issues.

All tanks are 100% pressure tested.

Patent Pending.

IMPORTANT NOTES: This tank is designed to accept the factory fuel pump or sender module from a '87-'95 Jeep Wrangler YJ with a 15 or 20 gallon Plastic Tank (NOT the 15 metal tank found in a few model years).
Because of shape and location changes, installation of this product may require changes to the exhaust tail pipe.

CRAWLER EXTREME GAS TANK —CJ

This is the Crawler™ EXTREME (EXT) Gas Tank to fit a Jeep CJ-7. It is specifically designed to allow the rear axle to be moved back up to 5" (4" on Dana 60) to strech the Jeep's wheelbase for greater stability on big tires.

Each tank is made from 1/8" thick Aluminum alloy and includes a matching heavy duty 3/16" thick skid plate.

Internal baffles reduce fuel movement and keep fuel near the pick up

1" more ground clearance

15 gallon fuel capacity (but with careful filling we got one more gallon in)

The CJ Crawler fuel tanks are designed to accept all the stock Jeep YJ type fuel sender/module. This will in tank fuel pump will work with most V8 conversions and all Jeep 6 cyl engines.

All tanks are 100% pressure tested.

Patent Pending.

NOTE: Because of shape and location changes, installation of this product may require changes to the exhaust tail pipe.

CRAWLER COMP GAS TANK —TJ

This is the Crawler™ Extreme COMP Gas Tank to fit a TJ (1997-2006).

The COMP tank is specifically designed to allow the rear axle to be moved back up to 7" (a full 6" with a Dana 60!) to strech your Jeep's wheelbase for the absolute BEST departure angle!

NOTE: Fits well with Currie Anti-Rock rear sway bar. Due to the unusual configuration of this tank to allow such radical axle re-location, it "might" require the installer to lengthen the connection(s) to the in tank fuel pump.

Each tank is made from 1/8" thick Aluminum alloy and is assembled in a foam lined matching heavy duty 3/16" thick skid plate with straps & factory Mopar roll over valves.

1" more ground clearance than the the stock Jeep skid plate.

All tanks are 100% pressure tested.

NOTE: To install this tank in a 2003 or newer Jeep, it might require a 1" body lift.

This COMP TJ model is a 14.5 Gallon capacity.

All Crawler fuel tanks are designed to accept all the stock Jeep fuel pick up, sending unit and other related equipment so you will not get any check engine lights or other engine computer issues.

Patent Pending.

NOTE: Because of shape and location changes, installation of this product WILL require changes to the last 14" of the exhaust tail pipe.

CRAWLER SUPER CLEARANCE
GAS TANK —TJ

This is Crawler™ SC (Super Clearance) gas tank and skid plate combo. This model Gas Tank has 3 key features: 2" of EXTRA ground clearance, Maintains stock fuel capacity & Allows 2.5" more axle clearance.

This model is specically designed to fit any Jeep TJ or LJ (1997-2006). The design allows for up to 2.5" of extra axle clearance (or stretch of wheelbase). Great for guys who have upgraded the rear axle to a LARGER Ford 9" or Dana 60.

NOTE: See the following models for more stretch: EXT for 5" or COMP for 7" stretch.

Each tank is made from 1/8" thick Aluminum alloy and is assembled in a foam lined matching heavy duty 3/16" thick skid plate with straps and factory Mopar roll over valves.

2" more ground clearance (than stock).

All tanks are 100% pressure tested.

NOTE: To install this tank in a 2003 or newer Jeep TJ or LJ we recommend a 1" body lift.

This high clearance model has a 19.5 Gallon capacity

All Crawler fuel tanks are designed to accept all the stock Jeep fuel pick up, sending unit and other related equipment so you will not get any check engine lights or other engine computer issues.

Patent Pending.

NOTE: The shape and location of this tank should not require changes to the exhaust system if still in the stock location.

CRAWLER ENDURO GAS TANK

Now you can explore with confidence. This extra capacity tank holds more gas allowing you to stay out on the trail longer without worrying about running out of gas!

The Crawler™ ENDURO Gas Tank will fit any TJ or LJ (1997-2006).

It is specifically designed to hold an EXTRA 5 gallons of fuel AND still fit in the stock location of your Jeep Wrangler TJ or LJ for those long distance trips.

This tank has the same relation to the axle as the stock tank, NO axle move back possible with this model.

For a tank with similar features but will allow a small amount of axle relocation and better ground clearance see the New SC model.

NOTE: this tank will ONLY fit with a Dana 35 or 44 in the stock location with the stock track bar!

Each tank is made from 1/8" thick Aluminum alloy and INCLUDES a matching heavy duty 3/16" thick skid plate.

Has multiple internal baffles to reduce fuel movement and keep fuel near the pick up.

All Crawler fuel tanks are designed to accept all the stock Jeep fuel pump/sending unit and other related equipment so you will not get any check engine lights or other engine computer issues.

NOTE: 2003 and newer TJ's are a completly different tank venting system. A 1" body lift is recommended to fit this Enduro model in the '03 or newer Jeeps.

Ground clearance is the same as stock or slightly lower depending on the model year Jeep you have.

24.5 Gallon total fuel capacity.

Includes factory Mopar vents and stainless steel straps.

Patent Pending.

To see more pictures of this product please click on the "More Pictures" button.

BATTERY TIE-DOWN (UNIVERSAL)

The battery tie downs available on the market today just do not meet the needs of the serious off-roader, so we decided to offer our own exclusive design.

• CNC Machined from Billet Aluminum alloy
• Ultra stiff design holds battery securly in place
• Universal design will fit all type fo batteries
• Anodized to prevent corrosion
• Easy to install

LICENSE PLATE MOUNT

This is a universal License plate mount that cleanly relocates your rear license plate to the center of the spare tire on your vehicle.

Fits both 5 on 4.5 and 5 on 5.5 lug patterns and works with beadlocks, aluminum or steel.

Lockable with your pad lock. Made of sturdy steel tubing and powder coated black.

HOOD LOUVER SET (TYPE 0)

This is the NEW Gen-Right Off Road hood louver set for a Jeep TJ/LJ or YJ. They can be mounted in many different positions on the hood and are sold in a 3 piece set.

This 3pc kit is: (1) Front louver and (2) short back louvers with color matched rivets.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

HOOD LOUVER SET (TYPE 1)

This is the Gen-Right Off Road 3 piece hood louver set for a Jeep TJ/LJ or YJ. They can be mounted in many different positions on the hood and are sold in a 3 piece set.

This 3pc kit is: (1) Front louver is 2 pcs that angle forward to pull air into hood and (2) short rear louvers.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

HOOD LOUVER SET (TYPE 2)

This is the Gen-Right Off Road 3 piece hood louver set for a Jeep TJ/LJ or YJ. They can be mounted in many different positions on the hood and are sold in a 3 piece set.

This 3pc kit is: (1) Front louver is 2 pcs that angle forward to pull air into hood and (2) short rear louvers.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

HOOD LOUVER SET (TYPE 3)

This is the Gen-Right Off Road hood louver set for a Jeep TJ/LJ or YJ. They can be mounted in many different positions on the hood and are sold in a 3 piece set.

This 3pc kit is: (1) Front louver that the louvers are angled slightly forward to help scoop the air and (2) short rear louvers.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

HOOD LOUVER SET (TYPE 4)

This is the Gen-Right Off Road hood louver set for a Jeep TJ/LJ or YJ. They can be mounted in many different positions on the hood and are sold as a 3 piece set.

This 3pc kit is: (1) Front louver is traditional direction and (2) long back louvers.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

Dimensions: Front louver 22" x 3-3/4" & Rear louvers 15-1/2" x 4"

HOOD LOUVER SET (TYPE 5)

This is the NEW Gen-Right Off Road hood louver set for a vehicle. They can be mounted in many different positions on the hood and are sold in a 2 piece set. 2pc kit is: 2 long Side louvers and No Front louver.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

Dimensions: 15-1/2" long x 4" wide.

NOTE: Black powder coating is $10 per set.

HOOD LOUVER SET (TYPE 6)

This is the NEW Gen-Right Off Road 2 pc hood louver set for any Jeep or other vehicle with a relativly flat hood. These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set. This 2pc kit is: 2 short louvers, designed for the rear of most hoods.

Standard finish is brushed aluminum, but can be upgraded to black powder coating.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

Dimensions: 7-3/4" wide x 8" long.

Four X Doctor - 1033 N. Victory Pl. - Burbank, CA 91502 (818)845-2194

copyright © 2002 - Four X Doctor corporation
All Rights Reserved, All content with exception of corporate
trademarked logos are the individual property of Four X Doctor